Facilities at CMED

 

Teaching Laboratories

Teaching Laboratories at CMED (and other departments in FKE) are managed under FKE Laboratory Management Unit (UPEM), which is headed by a Laboratory Manager, assisted by 1 Assistant Engineer and a number of Technicians.

Currently there are 6 Teaching Laboratories at CMED to facilitate the undergraduate students to conduct some experiments related to electrical engineering, especially in control, instrumentation, robotics and mechatronics field. Details of those Teaching Laboratories can be found from the respective links as follows. Some available facilities in each laboratories are listed here.

1. Basic & Applied Control Laboratory

Room no. : P08-414-01
Academic Lab. Coordinators : Ts. Dr. Herman Wahid (Basic Control) & Dr. Sophan Wahyudi Nawawi (Applied)
Assistant Engineers : Mrs. Norazian Ahmad (Basic Control) & Mrs. Fazilawati Ramli (Applied Control)
Phone : 07-55 35296


Laboratory space

Servo Trainer Kit

Inverted Pendulum System

TRAS System

Gantry Crane System

Omron PLC Training Kit

[More info…]

2. Instrumentation Laboratory

Room no. : P02-419
Academic Lab. Coordinators : En. Muhammad Shukri Abdul Manaf
Assistant Engineers : Mr. Mohd Faiz Hj Abas & Mrs. Siti Rohani Samiron
Phone : 07-55 35258


Rotational Speed/Position Kit

Industrial Pressure Meas.

Industrial Mechanical Meas.

Industrial Moisture/Humidity

Temperature Sensor Meas.

Industrial Liquid Level/Flow

[More info…]

3. Mechatronics Laboratory

Room no. : P19a-02-02-01
Academic Lab. Coordinators : Dr. Salinda Buyamin
Assistant Engineers : Mr. Noh Hj. Mohamad
Phone : 07-55 57195


Pneumatic System

Linear Actuator System

Hydraulic System

Siemens PLC Kit

Electro-pneumatic System

Lift System

[More info…]

4. Process Control Laboratory

Room no. : P10-119
Academic Lab. Coordinators : Assoc. Prof. Dr. Norhaliza Abdul Wahab
Assistant Engineers : Mr. Md Fadzli Sahri
Phone : 07-55 35380


Heating/ventilation System

2-Tank Level Control

Level Control System

Pneumatic Calibration

Couple Tank Control

Tomography System

[More info…]

5. Robotics Laboratory

Room no. : P08-208
Academic Lab. Coordinators : Assoc. Prof. Dr. Mohd Noh Ahmad
Assistant Engineers : Mr. Saifuddin Razali
Phone : 07-55 35289


SCORBOT-ER 4u

KUKA Robot

ABB Robot

Intelitek spectraLIGHT 0200

Intelitek Programmer

Various Robot Projects

[More info…]

6. Simulation Laboratory

Room no. : P08-310
Academic Lab. Coordinators : Ts. Dr. Anita Ahmad
Assistant Engineers : Mr. Fairus Foat
Phone : 07-55 35722
Avalaible tools/softwares : 3-D printers, Solidworks 2014, Matlab 2014, Labview, NI MYRIO-1900, NI Kits: Starter Kit, NI MYRIO Kits: Embedded Kit, Ni Elvis III, Microsoft Offices, Internet browsing

DSC_0088
Laboratory Space
DSC_0093
3-D Printer (Type 1)
DSC_0091
3-D Printer (Type 2)

 

DSC_0088
Laboratory Space
DSC_0093
Laboratory Space
DSC_0091
Laboratory Entrance

 

DSC_0088
5S Corner
DSC_0093
Laboratory Entrance

[More info…]

More details of other Teaching Laboratories available at Faculty of Electrical Engineering (FKE) can be viewed [here].

 

Research Laboratory

Research Laboratories at CMED (and other departments in FKE) are managed under FKE Laboratory Management Unit (UPEM), which is headed by a Laboratory Manager, assisted by 1 Assistant Engineer and a number of Technicians. Currently there are (4) Research Laboratories at CMED to facilitate the postgraduate students to conduct their researches related to electrical engineering, especially in the control, instrumentation, robotics and mechatronics field. Details of those Research Laboratories can be found from the following links:

More details of other Research Laboratories available at Faculty of Electrical Engineering (FKE) can be viewed [here].

CMED LINKS

CONTACT US

Director
Control & Mechatronics Eng. Dept.
Faculty of Electrical Engineering
Universiti Teknologi Malaysia
81310 UTM Johor Bahru
Johor, MALAYSIA 

Email: hazlina@utm.my

FOLLOW US

VISITORS SINCE OCT 1, 2017

html code for visitor counter